|
 |
 |
Quality and Experience in Weighing
Instrumentation |
|
|
Lucid - Designed for performance
|
|
| Features |
| Unrivalled reputation.
7 Digit, bright, easy to read, large LED
display.
Stainless steel enclosure with integrated
wall mounting brackets.
Trade Approved with any R60 loadcells.
Trade Approved for many legacy loadcells.
High resolution weighing performance.
Linearity adjustment.
Accommodates extremes of dead load and signal.
Superb digital weight filtering.
x10 resolution test mode.
Configuration via front panel or serial
communication.
Two serial ports, printer port can be used
for remote display.
Memory tares, semi automatic tare and set
zero functions.
2 internal relay outputs, 2 opto-coupled
inputs as standard.
Real time clock as standard.
Versatile print formatting.
PLU's recalling A/N text, setpoints, part
weights and totals.
Multi-drop communications.
Sophisticated fill control with fast cut
off and predictive software.
Variety of setpoint operating modes.
Many advanced software features. |
| |
| Options |
| Flange mount version - see Datasheet.
Analogue output 0-10V, 4-20mA.
Flash Electronic Tally Record (Alibi Device).
kg/lb version.
Axle weighing version.
ModBus. |
| Display |
mm |
7 Red LED digits 20mm |
| Front Panel |
|
Membrane with tactile metal domes,
beep response, 5 button operation |
| Annunciators |
|
4 LED's (Motion/Zero/Net/Gross) |
| Internal Resolution |
counts |
20 bit ADC (1:1,000,000) |
| Maximum Display Resolution (trade) |
divisions |
10,000 |
| Maximum Display Resolution (non-trade) |
divisions |
1,000,000 (x10 test mode) |
| EC Approvals OIML Class III + IIII |
certificate |
NMI T2532 TC 2489
NWML UK 2489 |
| Input Signal Range |
mV/V |
-4.5 » 4.5 |
| Zero Offset Range |
% |
100% of Input Signal Range |
| ADC Conversion Rate |
Hz |
50 |
| Linearity Error |
%FS |
< ±0.0007% |
| Differential Non Linearity |
|
± 0.5 LSB |
| Span Temperature Coefficient |
ppm/°C |
1 |
| Zero Temperature Coefficient |
µV/°C |
0.005 |
| Power Consumption (typical) |
W |
5-10 |
| Common Mode Rejection (@50Hz) |
dB |
200 |
| Power Supply Rejection (@50Hz) |
dB |
120 |
| Operating Voltage |
VAC |
230/115Vac* / 12-28Vdc* |
| Weight |
kg |
3kg (shipping 3.5kg) |
| Transducer Input Specifications |
| Transducer Type (4 or 6 wire) |
|
Resistive, full bridge |
| Transducer Input resistance |
Ω |
Minimum 43Ω (up to 8 x 350Ω cells) |
| Excitation Voltage |
Vdc |
10 (nominal) |
| Minimum Signal Requirement (approved) |
µV/e |
1 |
| Minimum Signal Requirement (non-approved) |
µV/e |
0.2 |
| Input Impedance |
MΩ |
> 20 (sense and signal) |
| Communication Ports |
|
1. Comms RS232 or RS485 (or
RS422*)
2. Printer RS232 (TX/Busy) |
| Baud Rate |
bits/second |
2400, 4800, 9600 |
| Protocol |
|
7/8 data bits, odd/even/no parity, 1/2
stop bits |
| Maximum Continuous Data Rate (test mode) |
Hz |
50 |
| Communication Protocol |
|
Ascii or ModBus* |
| Operating Temperature |
°C |
-10 » +40 |
| Storage Temperature |
°C |
-10 » +70 |
| EMC Immunity/Emissions |
|
EN45501, EN55022 |
| Sealing |
|
IP66 |
| Case |
|
Grained 304 Stainless Steel
Integrated mounting brackets |
| Cable Glands |
|
4 off PG7 |
| Analogue Output* 0-10V or 4-20mA |
|
15 bit (adjustable range)
Max drive load for 4-20mA:
900Ω (active)/1200Ω (passive) |
| Inputs |
2 (1*) |
DC opto coupled
< 6V off; > 10 - 30V on |
| Outputs |
2 (3*) |
2 relays - various types available
(1 Darlington type transistor*) |
| * According to specification |
|
|
